A simple little barebones replica of the Taurus Judge revolver handgun as seen in Payday 2 among other media.

Looking for the legendary Anarcho skin edition? Check my other listings 😉

Its a fairly accurate replica to the one used in game with with some more toned-down features for easier printing and painting (such as a symmetrical layout with no cylinder arm/pin etc.).

NOTE! These are unpainted. Any painted or coloured examples in the images are just crude little mock examples I did for my own amusement. This is a bit of a kit so its all up to you to paint it how you like 🙂

I can’t confirm if the scale and proportions of the Judge are close to Taurus’ real deal but its a chonky little hand cannon for sure.

The standard model consist of the following pieces:
The main revolver frame
A cylinder split into two halves
A trigger
A hammer
A pistol grip
A front and separate rear ironsight
Reload switch
Blaze Orange muzzle plug

All non moving. None of these parts move which was my intention before I even started the model.
I designed this to be as simple as it gets with the intention of using them for future Comic Con and public cosplay events. – No moving Parts – No realistic colours – Basic proportions etc. Something that was easy to print and easy to work with and give both you and the con venue security as little grief as possible. If you want realism then I strongly advise looking elsewhere however if you want a feature or two adding to give it that bit more faithfulness then message me and I’ll see what I can do.

To comply with US and other international laws all firearm props will have a painted blaze orange muzzle or outer barrel and come with a blaze orange plug for the barrel.

Assembly requires nothing more than some good strong glue, be it super glue, gorilla glue, crazy glue etc and some sanding. I tend to start with 140 grit for sanding the surfaces then work to a finer grit so they sit flush to make the seam as narrow as possible. I originally made these with the intent of slapping some spray paint for a quick and easy paint job but there’s nothing to stop the more crafty creator from taking their own to the next level with a more intricate paintjob.

And one more time for the people at the back:
PLEASE NOTE THE FOLLOWING:
– This might require some sanding, painting, and gluing to make into a solid prop. These are not painted or glued together by me. That’s your job. Hence the low price.
– This is made of PLAwith around 20-40% infill depending on the parts and while its sturdy and bulky enough thinner parts such as the trigger and hammer may snap under high pressure so don’t go squeezing the sticky outy bits.
– I cannot guarantee this is 100% con-safe. Rules change over time and vary between countries, events and individual staff members. Its up to you to paint the gun and present it in such a way that it is con friendly.
– Don’t act like an idiot with your prop pew pew. Don’t point it at random people, don’t modify it to look hyper realistic and don’t tote it about in public.
– These are made to order and I will actively adjust processing times to best suit my workload. If the processing time is 7 days and you haven’t received your parcel on the morning of day 7 then that’s why. Allow an extra couple of days for postage.
– And lastly – The colour of filaments used may vary. As of 23/05/2020 I aim to print them in greys, whites and maybe even silver depending on what I have available. Black may also be used.

Any questions or requests please feel free to ask 🙂