This listing is NOT FOR A 3D MODEL BUT FOR AN ACTUAL PROP
THE PICTURE ABOVE IS A PLACEHOLDER IMAGE AS I HAVE FINISHED THE 3D MODEL BUT DIDN’T HAD TIME TO PRINT AND POST PROCESS IT YET.

——————————————————————————

To comply with Etsy Marketplace Integrity rules, All props that could be mistaken for a real firearm will now have a blaze orange tip on the cannon end.
Please, be sure to check your own country rules regarding firearm/weapon replicas ownership (removing the orange tip/marking can be illegal in some country.)

——————————————————————————–

Here’s a 1:1 fan-art inspired AER9 Laser Rifle from Fallout 4

Available in a raw 3d printed kit or fully finished and assembled.

Time to make: between 2-4 weeks depending on current order queue

The replica weighs around 1,2kg and its lenght is 800mm (31.4 inches)

The microfusion cell can be removed at will using the locking mechanism

For Raw 3D Printed kits:

Perfect for people on a budget or people wanting to assemble and paint it themselves.

Printed on a high quality 3D Printer Ultimaker 2 with high quality FormFutura PLA with a standard resolution of 0.1mm (100 microns) or 0.15mm (150 microns) for really big parts to get the best result possible with a respectable leadtime.

Parts are raw from the printer, meaning some clean-up is required (removing support, brims) but don’t worry! I always design the parts with little to no support to ease up this process.

Printed in silver or black, depending on what I have at the moment. Can be printed in custom colors this will change the deadline and a small fee will be added (to be discussed in PM for more info)

3D Printed items can be glued with super glue (cyanoacrylate) but I recommend epoxy glue. Pegs included for easy and accurate assembly.

For fully finished props:

Sold fully painted and assembled.

This prop is perfect for cosplayers and/or collectors.

It was modeled, printed and painted by myself

It is made of 20+ different parts and assembled with an assembly pin and hard glue.

The replica is made of PLA, some parts may be made of ABS depending on the filament i have at the time.

It’s painted with an airbrush and acrylic paint. A coat of varnish is applied to maximize paint protection.

This prop’s trigger is fixed and not fire anything

If you have any questions, feel free to ask by private message or e-mail me atstarjeff3d [!at] gmail.com

Intellectual property belongs to Bethesda
Original design by Bethesda, Fallout dev team

Recast not allowed