This is a Handmade Majoras Mask Replica from The legend of Zelda series! It’s made for wearing at conventions, parties, Halloween… or if you’re like me, just for fun around the house. XD (You can also hang it on the wall for decoration, when not being worn. )

^u^ My Majora’s Mask Replica/Cosplay Mask are 100% handmade by me, NO 3D printers or paper models where used. I made this by hand, and with skill, hard work, and patience. I don’t take the cheap way out and 3D print the in game models, to make a quick buck.
((The photo’s for the listing are the same masks just in different lighting at different times of the day or where taken inside.))

~Hey, Look, Listen!~
If you need a mask for a specific date, I recommend ordering a mask at least 2 months or 60 days ahead of that specific date. I don’t like to be pressured to rush out a masks, just because someone ordered last minute, so please order ahead of time. 🙂
Also: I only work on 3 masks at a time, so if this listing “disappears/is sold out” it means I’m working on those 3 masks at the moment. Once I get a those 3 done and shipped out, I put this listing back up. So, if your planning on buying a mask sometime in the future, I recommend following this listing and/or my shop so this listing doesn’t disappear on you.

______________________________
So, what are you looking for?

Painted mask’s cost more and take longer to make, but are completely finished masks that have been: Painted, finished, and has x2 straps, x1 slider buckle, x1 release buckle, x2 triangle D hooks(picture hooks), and x4
3”x3”x0.5” foam padding. (Separate and put on the side in the box, or glued onto the mask, it’s your choice.)

• Option 1: Basic, Flat Style: It has a new, bright, and clean look to it. This is the basic style that most people prefer.

• Option 2: – Basic, Grunge Style: Is painted just like basic style, but has a dark grungy colors dabbed on top of that, to make the mask look a bit more old, dark, and worn.

•Option 3- Partial Wood Style- These masks have wood lines carved all over the mask, all except for the eyes. The clean eyes on top of the wood look really make these masks, POP!

•Option 4- Full Wood Style- These masks have wood lines carved all over the entire mask, making it appear as if it’s made out of wood. (Wood lines on just the eyes will be slightly different from mask to mask. That’s because the lines on just the eyes are hand carved. So, each full wood mask is slightly unique from the last! 😀 )

______________________________
Processing/Crafting time:
These are “made to order”, meaning they are made from scratch as soon as you buy. Masks take about 1-6 weeks (42 days), plus 2-9 days for the USA, or 7-14 day’s international.

Shipping time:
• For anyone in North American: Free shipping, and makes it to you in 2-9 days.
• Everyone outside of North America: Calculated Shipping, and makes it to you in 7-14 days.

Remember: If you have a specific date you need a mask by, order it 2 months or 60 days ahead of time, so you get it on time.

______________________________
Common Questions:
Do you have Matt gloss? I’m not a fan of the glossy finish.)
“Yes, I do have Matt finish. Gloss is the default, but If you don’t like the shinyness of the gloss finish, I do have Matt finish instead, just be sure to add “I’d like a Matt finish!” to you note when buying.”

Is the mask comfortable?
“Yes, but only WITH the foam padding, glued onto the forehead and chin. Without the padding… heck no, it’s not comfortable. It squishes down on your forehead and nose.“

Can you see out of it?
“You can see out of the lower inner corner of the eyes. I compare it to looking out a pair of goggles. You can see out of it, but you don’t have any peripheral view.”

Are the Wood masks made of real wood?
“No, they’re made out of plastic.”

Can I wear this to a rave?
“I surprisingly get this question a lot… No, I would not recommend wearing this to a rave. These mask’s have limited vision, and the horns are sharp.”

Can you make the eyes glow/light up?
“Unfortunately no, I’ve tried using clear plastic with Led lights, and I’ve tried glow-in-the-dark paints, and I’ve tried using my regular masks with the eyes hollowed out with led lights in them, all three results where very underwhelming and disappointing. ;( ”

My foam padding is a different color!?
“I use dark gray foam, it will oxidize overtime in slightly turn yellow-gray.”
______________________________
Size and other info:
My masks are larger then the average Majoras Mask Replicas here on Etsy, so they fit your face better.

Dimensions and other information:
Length- 17 inches
Width- 20 inches
Height- 4 inches
Ware-able Mask Weight- 2.3 lb.
Decor Masks Weight- 3lbs to 5lbs.

Material and info:
~Smooth On’s- Smooth Cast 65D (Drop Resistant Plastic, and non-toxic)
~Master’s Touch Acrylic Paints
~Krylon Crystal Clear Gloss

X2 Black Straps
X1 Side Release Buckle
X1 Slider Buckle
X4 3x3x0.5” foam padding. Glued on, or put inside in the box. (Your choice, but if you don’t say, the default is on the side, in the box.)
X2 Black D Ring Triangle Hooks, glued and screwed on the mask, behind the two horns on the top of the mask.

– This mask is 100% hand made, no 3D printers where used.
– This mask is”wearable” and “seeable”.
– If you order a unpainted mask and don’t tell me what kind of unpainted mask you want, I will send a “unpainted basic flat mask” as default.

______________________________
Customs fees and Taxes do not apply!
(I pay for the shipping only, and not the customs fees/taxes. So, you may have to pay extra to pick it up.)

*All sales are final after 24 hours of ordering! I will only do refunds in the first 24 hours of ordering, or if the mask is bought multiple times on accident.

______________________________
Warning(s)
– These masks are covered in highly flammable clear coating, do not put these masks near fire or near a extream heat source.

– Common sense warnings:
1. The horns are very sharp, so handle with care and responsibility. I’ve cut my hands on the horns a few times, so be aware.

2. If you order a Decoration Mask, and modify it, so you can wear it. I am not responsible for any injuries. Because that sucker is heavy and will most likely break you nose.

3. This mask is made out of Plastic, so it can melt/warp in the heat. My advice is kinda treat it like your phone, so for example don’t leave it near a stove or don’t leave it on the dashboard of your car on a hot summer day. (If you do accidentally melt your mask, you can use a hair dryer and warp it back into shape.)

______________________________