This is a 3D-printed Scarlet Witch headpiece/tiara.

The tiara comes raw – unpainted

With the Raw DIY print options, the tiara will require sanding and prep work for a smooth surface. Layer lines and other imperfections such as from supports, under-extrusion, or over-extrusion may be present. Please note: while we generally try to print tiaras in gray, white, or black, it will ultimately be printed with what materials we have available. If you are wanting a raw tiara in a specific color, please let us know.

Due to the time constraints, we produce a very limited quantity of finished tiaras. We do not generally finish helmets to keep in stock, only as ordered. Finished tiaras cost $55 and can take 3-4 weeks to complete. Custom paint options are available and usually have no additional charge. So if you are interested in a finished mask, please feel free to message us.

For an in-depth description of each option, please visit our FAQ.

Raw prints can usually be ready to ship within 1-3 days. depending on order volume and potential unavoidable delays:

We offer two standard sizes for the Scarlet Witch tiara, small and large. Feel free to reach out to us if you would like to verify which size is right for you or if you would like to order a custom size to your exact measurements.

Tiara is designed to be worn using elastic or by using prosthesis/costume adhesive to keep in place, based on your need. Included with each tiara is a 1/4″/6.35mm elastic band and some glue for you to customize the fit to your size.

Our Scarlet Witch tiara has been designed by Geoff Wicks of Hex3D. For more information on the modeler, please visit Geoff’s Patreon (www.patreon.com/Geoffro).

Not seeing what you are looking for? Message us about our custom print services!