Buy 10 and get 10% off with this coupon 10PERCENTOFF

This is a very small and powerful sound module to bring your cosplay to the next level that will leave others in awe with the uniqueness of adding sound to your getup or add the next layer of scare facture to your Halloween costume.

This kit includes:

The MP3 player board with built-in 3 Watt amplifier
4 push buttons with 12″ leads
a 3-watt speaker with 6 inches of wire connected.
3 x AA battery holder with 5.9″ leads
All that is needed is a small screwdriver to attach the wires to the MP3 board. Add 3 x AA batteries and you are good to go!

Features of The FN-T418

Uses a micro USB port to directly plug into the USB port of the PC for easy use of the sound module.
Built-in an 8MB flash memory, which is able to store a total of about 8 minutes long MP3 files of
Supports earlier Windows, Windows 10, and Mac operating systems
Support audio format: MP3 and WAV
Able to play multiple audio files per button.
Built-in a class D 3Watts amplifier IC and a 3.5mm audio jack for stereo output
Directly drives a 0.5Watts to 3Watts (4ohms to 8ohms) speaker
Volume is adjustable by adjusting the blue potentiometer
Built-in headphone output for easy use if the external speaker is not something that will work with your project.
4-Key Operations with 7 Triggering Modes
0: Short press the button to start playing, and during playing, if you press the button again, the playback will be interruptible and it will play from the beginning.
1: Press the button and hold to start playing repeatedly, and when the button is released the board stops playing.
2: Short press the button to start playing, and during playing, if you press the button again, the playback will be NOT interruptible.
3: Short press the button to start playing repeatedly and press the button again to stop.
4: Press the button and hold to start playing once, and when the sound file goes to the end, the board stops playing.
5: Interruptible and switches to the next sound file.
6: Uninterruptible
Working voltage: 3.7-5V DC
Working current: ≤100mA (1Watt 8ohms speaker)
Standby current: 0μA
Suitable to be powered with 3 x AA, 3 x AAA batteries or a Li-ion battery
PCB size: 50mm x 34mm
Height of the module: 14mm
Features of the Battery Holder

With leads (150mm)
For: 3 x AA (LR06)
Features of the Button

With 12″ (30mm) leads
Ends stripped and tinned 0.12″ (3mm)
Specifications:

Momentary Push Switch
Flat rubber head (white)
3mm height
Features of the speaker

Small Size
Power rating: 3W
Impedance: 8Ω
57mm diameter and 12mm high
6 inches of wire pre-attached.