ASSEMBLY REQUIRED. 3D STL files inspired by Calibrum from League of Legends.

You will need a 3D printer with print space at least 400mm tall. If you need them cut into smaller pieces, please let me know.

The prop is 65″ from tip to tip.

The following is not included. To complete this kit, you will need:
-two 36″ long x 1/4″ diameter metal rod. The rods will need to be cut into 29″, 8″, and 18″ segments.
-Superglue
-Spot putty
-Filler Primer
-Sandpaper
-Paints

Please read this to help you understand how to finish the kit:

https://docs.google.com/document/d/1y-v4EJIr55YXxefABXLse59xhHHrbdeaFEW7jFYatyw/edit?usp=sharing